Cooktop/Oven repair

Fix stove - Repairs In order for the stove to serve for a long time, to work properly, it is important to connect and operate it correctly. Then the quality of baked goods and dishes will always be excellent, and the process of cooking them is safe. The stove must be installed without distortion. It is better to entrust its connection to a professional. He will competently check the tightness of the connection with the gas hose to avoid leaks. And, importantly, it will install a protective grid at the entrance to the device. It is recommended to start repairs by reading the user manual of the stove. It describes possible malfunctions, their causes, self-elimination methods. Typical breakdowns, subject to safety precautions, will not be difficult to fix. If the stove does not heat up after switching on, most likely the matter is in the switches. They cannot be repaired, they are simply replaced with new ones. Are the switches working and the stove is not heating? The reason may be a breakdown of the heating coil. It is strictly forbidden to twist or solder it. The element is simply replaced with a new identical one. To carry out such a repair, you will have to disassemble part of the plate. Remove the back sheet, the upper part of the case. The spiral is located in the core of the stove. A new heating element is fixed in the same way as the damaged one. It is important to take into account that the spiral should not touch the metal parts of the stove body. Place it strictly on an asbestos lining. The spirals on the stove racks must also be replaced. The procedure is performed carefully to avoid breaking the wires of structural elements. It is important not to forget to loosen the cage screws during repairs. Otherwise, pulling it out to remove the spiral will fail. After completing the repair, the stove is assembled. The first test run is carried out without any products in it.