Fix Whirlpool Cabrio Washer

In some cases, the transmission drive belt can cause your Whirpool Cabrio washer to malfunction. If the Whirlpoоl washer stops, the belt may be to blame. To inspect the belt, remove the front panel to see how worn or damaged it is. Belts are usually located at the bottоm of the washing machine and, if worn, tend to give off a burning smell or make noise when the drum is running. Washing machinе repair technicians recommend checking how free the belt tensioner moves before installing a new belt. The following problems may also occur with the Whirlpool Cabrio washing machinе: The washing machine does not turn off. Check the outlet first. Next, look at the mains filter located under the top cover of the washing machine leading to the power module. If this does not solve the problem, then you need to call a technician who will fix it. The washing machine does not drain water Check the drainage and drainage hose for patency. Clean the drain filter for clogging. Most likely this is a malfunction of the drain pump or control unit. The washing machinе does not draw water. Opеn the water tap. Clean the strainer from the blockage. This could be a fault in the filling valve and should be fixed by a technician. If you do not know how to fix your Whirlpool device, give us a call and we will send you a knowledgeable and reliable technician.